| HARLEY
DAVIDSON - All
Softails, including Fatboy. |
| Sku# |
- FXST/FXSTI Softail Standard
- FXSTB/FXSTBI Night Train
- FXSTS/FXSTSI Springer Softail
- FXSTC 2007 Softail Custom
- FLSTF/FLSTFI Fat Boy
- FLSTN/FLSTNI Softail Deluxe, Heritage Nostalgia
& Heritage Special Note: The Softail Deluxe works with
the ST-L1, ST-L1HB, ST-L1DB and ST-L1SDDB
- FLSTS/FLSTSI Heritage Springer (Does not fit
Factory Saddlebags)
- FLSTSC/FLSTSCI Softail Springer Classic
- FXSTD/FXSTD1 Deuce
|
Model
Number |
Model
Year |
Model
Picture |
| |
ST-R1
(all model years except 2006 & later
FXST, FXSTB, FXSTS 2007 FLSTF & 2007
FXSTC, see ST-R2)
This model is used on all softail
models except the 2006 & later FXST, FXSTB and FXSTS, 2007
FLSTF (see ST-R2) & 2007 FXSTC (see ST-R3HB).
The docking posts attach to the front two mounting
holes in the fender rail. (6 1/4" apart). If turn signals
are to be relocated see ST-L1.
(If you have a backrest see kits ST-R1HB and ST-R1DB)
For Deuce, see its
separate listing below. |
|
Fits
all model years except 06' & Later FXST,
FXSTB, FXSTS 2007 FLSTF & 2007 FXSTC |
ST-R1
|
| |
ST-R1HB
Used with a Hardmount
Backrest
This model is used on all softail
models except the 2006 & later FXST, FXSTB and FXSTS, 2007
FLSTF (see ST-R2) & 2007 FXSTC (see ST-R3HB). This
is the same bracket as the ST-R1 but comes with different
hardware. The docking posts mount outside the backrest. The
backrest is not provided and must be purchased seperately. |
|
Fits
all model years except 06' & Later FXST,
FXSTB, FXSTS 2007 FLSTF & 2007 FXSTC |
ST-R1HB
|
| |
ST-R1DB
Used with a quick
detachable backrest.
This model is used on all softail
models except the 2006 & later FXST, FXSTB and FXSTS, 2007
FLSTF (see ST-R2) & 2007 FXSTC (see ST-R3HB). This
is the same bracket as the ST-R1 but comes with different
hardware. The docking posts mount outside the detachable
hardware. The detachable hardware is not provided and
must be puchased seperately. |
|
Fits
all model years except 06' & Later FXST,
FXSTB, FXSTS 2007 FLSTF & 2007 FXSTC |
ST-R1DB
|
| |
ST-R3HB
FXSTC 2007 Softail Custom
This model is used on the 2007 FXSTC, Softail Custom. The
docking posts attach to the front two mounting holes in the
fender rail outside the backrest. (5 5/8” apart) If turn
signals are to be relocated see ST-L1. If
the stock backrest is replaced with the detachable backrest use
ST-R2DB. |
|
Fits
all 07' model years |
ST-R3HB
|
| |
ST-L1
All
models
Not used with factory Heritage saddlebags. See HRT Models. This
model is used on all softail models. The docking posts attach to
the rear two mounting holes in the fender rail (9 1/4"
apart). Turn signals must be relocated off the fender to use all
ST-L1 models.
Harley Davidson Deluxe will need the ST-L1
brackets.
If your Deluxe has a hardmount backrest you need the ST-L1HB
and if you
have a detachable backrest you need the ST-L1DB |
|
Fits
all model years |
ST-L1
|
| |
ST-L1HB
Used with
Hardmount Backrest
All Softails with Hardmount Backrest. This is the same bracket
as the ST-L1 but comes with longer mounting bolts. The
backrest is not provided and must be purchased separately. |
|
Fits
all model years |
|
| |
ST-L1DB
Used with
detachable backrest
All Softails with Detachable Backrest. Will work with Softail
Deluxe with Standard Detachable Backrest. This is the same
bracket as the ST-L1 but comes with different hardware. The
docking posts mount outside the detachable hardware. The
detachable hardware is not provided and must be purchased
seperately. |
|
Fits
all model years |
ST-L1DB
|
| |
ST-L1SDDB
Used with deluxe detachable backrest.
FLSTN: Softail Deluxe with New Deluxe Detachable Backrest. This
is the same bracket as the ST-L1 but comes with different
hardware. The backrest is not provided and must be
purchased seperately. |
|
Fits
all model years |
ST-L1SDDB
|
| |
ST-R2
This model is used on 2006 & later FXST,
FXSTB and FXSTS, 2007 & later FLSTF and 2008 & later
FLSTSB models. The docking posts
attach to the front two mounting holes in the fender rail. (5
5/8” apart) May only be used with small to medium
saddlebags to avoid relocation of turn signals. If turn
signals are to be relocated see ST-L1 |
|
2006-2008
FXST, FXSTB, FXSTS and 2007-2008 FLSTF |
ST-R2
|
| |
ST-R2HB
This model is used on 2006 & later FXST,
FXSTB and FXSTS, 2007 & later FLSTF and 2008 & later
FLSTSB models with Detachable Backrest. This is
the same bracket as the ST-R2 but comes with different hardware. |
|
2006-2008
FXST, FXSTB, FXSTS and 2007-2008 FLSTF |
ST-R2HB
|
| |
ST-R2DB
With
Detachable Backrest
Used on 2006 FXST, FXSTB and FXSTS and
2007 FLSTF models with Detachable Backrest. This is the
same bracket as the ST-R2 but comes with different hardware.
hardware. |
|
2006
FXST, FXSTB, FXSTS and 2007 FLSTF |
ST-R2DB
|
| |
DUC-R1 & DMS-EB all
years
This models is used on the deuce, all years. "The
Deuce" DMS-EB is a special bracket to be used on the Deuce.
The mounting system is a formed chrome plate mounted under the
fender rail on the deuce to provide mounting points for the Easy
Brackets. The original turn signals remain in the factory
location. |
|
Fits
all model years |
DUC-R1
& DMS-EB
|
| |
| |
| HARLEY
DAVIDSON - Heritage
Softails. |
| For use with Heritage Softails that are using existing
Harley Davidson Heritage saddlebags only. Will not work with stock
Heritage Springer saddlebags. |
| |
HRT-R1
Fits all Heritage Softails 1999 and older. For use with existing
Heritage Saddlebags. Replaces all existing hardware and converts
the Heritage bags into a true detachable system. |
|
1999
and older |
|
| |
HRT-R1DB
Fits all Heritage Softails 1999 and older. For use with existing
Heritage Saddlebags. Replaces all existing hardware and converts
the Heritage bags into a true detachable system. For use with
motorcycles w/ Detachable Backrest. |
|
1999
and older |
|
| |
HRT-R2
Fits Heritage Softails 2000 through 2002. For use with existing
Heritage Saddlebags. Replaces all existing hardware and converts
the Heritage bags into a true detachable system. |
|
2000 through 2002 |
|
| |
HRT-R2DB
Fits Heritage Softails 2000 through 2002. For use with existing
Heritage Saddlebags. Replaces all existing hardware and converts
the Heritage bags into a true detachable system. For use with
motorcycles w/ Detachable Backrest. |
|
2000 through 2002 |
|
| |
HRT-R3
Fits 2003 Heritage Softails. For use with existing Heritage Saddlebags.
Replaces all existing hardware and converts the Heritage bags
into a true detachable system. |
|
2003 |
|
| |
HRT-R3DB
Fits 2003 Heritage Softails. For use with existing Heritage Saddlebags.
Replaces all existing hardware and converts the Heritage bags
into a true detachable system. For use with motorcycles w/ Detachable
Backrest. |
|
2003 |
|
| |
FLH
/ Shovelhead
Older Harley Davidson FLH Models. This model is used on
the older FLH models. The docking posts attach to the two
mounting holes in the fender rail. Holes must be 7 1/4"
center to center. |
|
|
FLH-R1
|
| |
FXR-R1
FXR & FXLR Models 90 & later. Note: Does not fit FXRP.
This model is used on the FXR models. The docking posts attach
to the front hole in the fender rail and the turn signal hole
after the turn signal is relocated off the fender rail. Note:
Turn signals must be relocated off the fender on all FXR models.
Great Bike Gear does not currently offer a turn signal
relocation kit for this model. This model is typically used with
small to medium saddlebags. |
|
1990 and later |
FXR-R1
|
| |
|
HARLEY
DAVIDSON - Sportster |
|
|
| Sku# |
Model |
Model
Number |
Model
Year |
Model
Picture |
| |
SPT-R1S
94 to 03 "Slimline"
This model is used on all sportsters 94 to 03. The docking posts
attach to the front hole in the fender rail and the rear hole on
the fender rail. This model is the standard Easy Bracket depth.
This model may be used if a smaller saddlebag is used and
located behind the rear shock. Turn signals must be relocated
off the fender on all Sporster models. Turn
signal relocation kits available. |
|
94
to 03 "Slimline" |
SPT-R1S
|
| |
SPT-R1
This model is used on all sportsters 94 to 03. Works with or without
hard mount backrest. The docking posts attach to the front hole
in the fender rail and the rear hole on the fender rail. This
model is deeper than the standard Easy Bracket to provide
clearance outside the rear shock. The model SPT-R1S may be
purchased if a smaller saddlebag is used and located behind the
rear shock. This model is typically used with small to medium
sadlbags. Turn signals must be relocated off the fender on all
Sporster models.
Turn signal
relocation kits available. |
|
1994
to 2003 |
SPT-R1
|
| |
SPT-R1DB
94
to 03 with Detachable Backrest
This is the same bracket as the SPT-R1 but is used with a
Detachable Backrest and comes with longer bolts. |
|
2004-2003 |
SPT-R1DB
|
| |
SPT-R2S
04
and later "Slimline"
This is the same bracket as the SPT-R1S but comes with different
hardware due to changes made in 2004. Fits 04 & later. |
|
04
and later "Slimline" |
SPT-R2S
|
| |
SPT-R2
This is the same bracket as the SPT-R1 but comes with different
hardware due to changes made in 2004. Fits 04 & later. |
|
2004
and later |
SPT-R2
|
| |
SPT-R2SDB
This is the same bracket as the SPT-R2S but is used with a
Detachable Backrest and comes with different hardware. |
|
2004
and later with detachable backrest |
SPT-R2SDB
|
| Fits
Harley Davidson Sportster motorcycles. Allows easy installation
and removal of leather saddlebags with no tools in seconds. Includes
locking device. Does not require the use of saddlebag support
brackets. |
|
| HARLEY
DAVIDSON - DYNA |
- FXD/FXDI Super Glide (96 to Present) (2005 Hard
Mount Backrest use DNA-L1SG)
- FXDC/FXDCI Super Glide Custom (96 to Present)
- FXDL/FXDLI Low Rider (96 to Present)
- FXDX/FXDXI Super Glide Sport (96 to 2005)
- FXDXT/FXDXTI Sport Touring (96 to 2005)
- FXDWG/FXDWGI Wide Glide (96 to Present)
- FXDI35 35th Anniversary Super Glide 2006
- FXDBI Street Bob 2006
|
| Sku# |
Model |
Model
Number |
Model
Year |
Model
Picture |
| |
DNA-R1
Used on all Dyna models 96 to 2005. The docking posts attach to
the front existing bolt hole and the turn signal hole after the
turn signal is relocated. Turn signals is relocated off the
fender to use all DNA models. Turn signal relocation kits
available. |
|
1996
to 2005 |
DNA-R1
|
| |
DNA-R1HB
With hard mounted backrest
Used on all Dyna models 96 to 2005 with Hard Mount Backrest.
This is the same bracket as the DNA-R1 but comes with longer
mounting bolts. The backrest is not provided and must be
purchased separately. |
|
1996
to 2005 |
DNA-R1HB
|
| |
DNA-L1DB
All
models 96 to 2005 with detachable backrest
This model is used on all Dyna Models 96 to
2005 with Detachable Backrest. Use the same docking points as
the detachable backrest (10 3/8" apart). The docking posts
mount outside the detachable hardware. The detachable hardware
is not provided and must be purchased seperately. |
|
1996-2005 |
DNA-L1DB
|
| |
DNA-L1SG
FXD 2005 Dyna Super Glide with Hard Mount
Backrest.
Backrest. This is the same bracket as the DNA-L1DB but comes
with different bolts. |
|
FXD
2005 Dyna Super Glide with Hard Mount Backrest |
DNA-L1SG
|
| |
DNA-L2
2006 only
Fits 2006 and later Dynas with or without Hard Mount Backrest
except FXDWGI. Turn signals must be relocated off the fender al
models. Turn signal relocation kits
available.
|
|
2006 |
DNA-L2
|
| |
DNA-L2DB
With
Detachable Backrest
Fits all 2006 Dynas except FXDWGI with Detachable Backrest. Use
the same docking points as the detachable backrest (10 3/8"
apart). The docking posts mount outside the detachable hardware.
The detachable hardware is not provided and must be
purchased separately.
|
|
2006 |
DNA-L2DB
|
| HARLEY
DAVIDSON - FXDWGI
Dyna Wide Glide 2006 & later and FXDF Fat Bob 2008 &
later |
| |
DNA-L3
2008 Fat Bob and
2006
FXDWGI
Fits 2006 FXDWGI with or without Hard Mount Backrest.
|
|
2006 FXDWGI |
DNA-L3
|
| |
DNA-L3DB
2008 Fat Bob with Detachable backrest
With
Detachable Backrest 2006
FXDWGI
Fits all 2006 Dynas FXDWGI with Detachable Backrest. Use the
same docking points as the detachable backrest (10 3/8"
apart). The docking posts mount outside the detachable hardware.
The detachable hardware is not provided and must be
purchased separately.
|
|
2006 FXDWGI |
DNA-L3DB
|
| |
DNA-L3DB
With
Detachable Backrest 2006
FXDWGI
Fits all 2006 Dynas FXDWGI with Detachable Backrest. Use the
same docking points as the detachable backrest (10 3/8"
apart). The docking posts mount outside the detachable hardware.
The detachable hardware is not provided and must be
purchased separately.
|
|
2006 FXDWGI |
DNA-L3DB
|
| |
|
|
|
|
|
DUC-R1
For use will all Duece models.
Turn signals remain in factory location. Must be used with a mounting
kit, manufactured and sold separately. Please check with us for
further detail |
|
|
DUC-R1
|
| Fits
selected Harley Davidson Dyna models. Allows easy installation
and removal of leather saddlebags with no tools in seconds. Includes
locking device. Does not require the use of saddlebag support
brackets. One hundred year anniversary bags for the FXDWG will
not work. |
|
| INDIAN
- Motorcycles |
| Sku# |
Model |
Model
Number |
Model
Year |
Model
Picture |
| |
SS-R1
SCOUT
and SPIRIT
Fits on Indian Scout and Indian Spirit. Will not fit on Indian
Chief. |
|
All
Years |
SS-R1
|
| |
CHF-R1
CHIEF
Fits on Indian Chief. Will not fit on Indian Scout or Indian Spirit.
|
|
|
CHF-R1
|
| No
Comments |
|
| EXCELSIOR
HENDERSON - Motorcycles |
| Sku# |
Model |
Model
Number |
Model
Year |
Model
Picture |
| |
|
|
|
|
| |
EH-R1
This model is used on the Excelsior Henderson. The docking posts
attach to the two mounting holes in the fender rail. |
|
All
Years |
EH-R1
|
| Fits
Excelsior Henderson frames. Allows easy installation bags on Excelsior
Henderson frames in seconds. Easy installation requires no tools.
Includes locking device. Does not require the use of saddlebag
support brackets. |
|
| KAWASAKI
- Motorcycles |
| Sku# |
Model |
Model
Number |
Model
Year |
Model
Picture |
| |
VC-R1
Will fit on Kawasaki Vulcan Classic 1500. Attaches to the two
(2) existing bolt holes on the fender rail. |
|
|
VC-R1
|
| |
VC-R1BR
Will fit on Kawasaki Vulcan Classic 1500 with a backrest. Attaches to the two
(2) existing bolt holes on the fender rail. |
|
|
VC-R1BR
|
| |
VC-R2
Vulcan Classic 1600: The docking posts attach to the
two mounting holes in the fender rail. Note: Helmet lock must be
removed. |
|
|
VC-R2
|
| |
VC-R3
Vulcan Classic 2000: The docking posts attach
to the two mounting holes in the fender rail. Note: The side
reflectors and helmet lock must be removed from the fender. |
|
|
|
| |
VC-R3BR
Vulcan classic 2000 with Backrest: Backrest
purchased separately. Will not work with Grabrail. |
|
|
|
| |
V800-R1
Vulcan Classic 800: The docking posts attach to
the two mounting holes in the fender rail. |
|
1996
to Present |
V800-R1
|
| |
V900-R1
Vulcan Classic 900:
The docking posts attach to the two mounting holes in the fender
rail. |
|
1996
to Present |
V900-R1
|
| No
Comments |
|
| HONDA-
Motorcycles |
| Sku# |
Model |
Model
Number |
Model
Year |
Model
Picture |
Magna
|
| |
MGA-R1
Honda Magna
MGA-R1 Attaches to the two (2) existing bolt holes in the fender
rail.
|
|
|
MGA-R1
|
| |
MGA-R2BR
Honda Magna
Magna with Backrest: This model comes with
longer bolts.
|
|
|
MGA-R2BR
|
Shadow
|
| |
ACE-R1
Honda Ace 750
ACE-R1 Attaches to the two (2) existing bolt holes in the fender
rail. |
|
|
|
| |
ARO-R1
Fits Honda Aero 1100
|
|
All
Years |
|
| |
ARO-R2
Aero 750: The docking posts attach to two rear
mounting holes in the fender rail.
|
|
All
Years |
|
| |
ARO-R2BR
Aero 750 with Backrest: This model comes with
longer bolts.
|
|
All
Years |
|
| |
SABR-R1
Sabre 1100: The docking posts attach to the
rear two mounting hols in the fender rail. |
|
All
Years |
|
| |
SABR-R2BR
Sabre 1100 with Backrest: This model comes wtih
longer bolts. |
|
All
Years |
|
Valkyrie
|
| |
VKE-R1
Fits Honda Valkyrie
|
|
All
Years |
|
VTX
VTX-1300C & 1800C models
VTX-1800F Model |
| |
VTX-C1
Fits Honda VTX 1800 Classic only and VTX
1800 and 1300 ClassicAttaches to the two (2) rear existing
bolt holes in the fender rail. If you have a Hondaline Backrest,
please use kit VTX-C1BR. |
|
All
Years |
|
| |
VTX-C1BR
Fits Honda VTX 1800 Classic w/ Hondaline Deluxe Backrest.
See
attached drawing for ordering instructions.Will not work with other Backrest Models. A special plate allows
you to mount the docking posts right to the backrest, keeping
everything close to the motorcycle.

(Click to enlarge) |
|
All
Years |
|
| |
VTX-C1BR-1
VTX-C Model with Hondaline Deluxe
Backrest only. See
attached drawing for ordering instructions. This
model is used on the 1800 VTX-C Model with a Hondaline
backrest. Backrest not provided, must be purchased
separately. The docking posts attach to the backrest.
This kit comes with a special mounting plate for installation on
the backrest.

(Click to enlarge) |
|